Eazypower 30206 1/4-Inch Hex Shank Chuck Adapter with 1/2-Inch-20 UNF Thread

Buy Cheap Eazypower 30206 1/4-Inch Hex Shank Chuck Adapter with 1/2-Inch-20 UNF Thread

Buy Low Price From Here Now

Readmore

Technical Details

- Easily adds a locking keyless chuck to any 1/4 inch hex drive tool.
- Allows use of locking steel keyless chuck, 1/2 inch-20 UNF thread to 1/4 inch hex, to utilize any standard shank drill bits 1/16 inch-1/2 inch sizes and accessories.
- Use #3 Phillips screwdriver to secure chuck with left-hand thread screw
- Isomax contractor quality
See more technical details

 "Won't Fit" 2008-12-15
By R. Skulavik (Lynchburg, VA)
Dec. 15, 2008 - This product was machined in China (stated on package) and no wonder it does not fix. The problem is with the 1/4 hex end. The shoulder (from the end of the adapter to the groove) is ~ 11.5mm to properly fit into 1/4" hex drive tool that shoulder should be ~ 8.5mm

On the other end the 1/2" - 20 UNF thread is OK but a little sloppy. Don't buy this product unless you want to machine/grind off 3mm of the shoulder, not hard to do but should not have fix their obvious machining broblem. This is not a fluke, I recently read the exact same complaint from a different customer on this product.




Images Product

Buy Eazypower 30206 1/4-Inch Hex Shank Chuck Adapter with 1/2-Inch-20 UNF Thread Now